Vena contracta





Vena contracta




Just beyond the Swartswood Lake Dam, the river is forced to narrow by a concrete bridge support. Flow separation is clearly evident at the sharp bend, just above the vena contracta


Vena contracta is the point in a fluid stream where the diameter of the stream is the least, and fluid velocity is at its maximum, such as in the case of a stream issuing out of a nozzle, (orifice). (Evangelista Torricelli, 1643). It is a place where the cross section area is minimum. The maximum contraction takes place at a section slightly downstream of the orifice, where the jet is more or less horizontal.


The effect is also observed in flow from a tank into a pipe, or a sudden contraction in pipe diameter. Streamlines will converge just downstream of the diameter change, and a region of separated flow occurs from the sharp corner of the diameter change and extends past the vena contracta.




Contents






  • 1 Explanation


  • 2 Echocardiography


  • 3 Shotguns


  • 4 Coefficient of contraction


  • 5 See also


  • 6 References





Explanation


The reason for this phenomenon is that fluid streamlines cannot abruptly change direction. In the case of both the free jet and the sudden pipe diameter change, the streamlines are unable to closely follow the sharp angle in the pipe/tank wall. The converging streamlines follow a smooth path, which results in the narrowing of the jet (or primary pipe flow) observed.



Echocardiography


Measurement of the vena contracta is useful in echocardiography, where it describes the smallest area of the blood flow jet as it exits a heart valve. This corresponds to the Effective Orifice Area calculated for heart valves using the continuity equation.



Shotguns


Vena Contracta was also a term used by several English shotgun builders of the 19th and 20th Century. The gun barrels of sporting shotguns tapered very heavily from the breech to the muzzle. Thus a gun with a 12 bore breech would have a 20 bore muzzle. The idea was to retain the advantages a heavy-hitting large bore shotgun while retaining the lesser recoil and easy maneuverability of a small bore. Several leading firms built this type of gun but it proved unpopular and most were returned to the manufacturers for large bore barrels. To most shooters perhaps the idea of placing a 12 bore cartridge into a 20 bore barrel was too "explosive". Complete functioning examples are now rare, though they are still not highly sought after.[citation needed]



Coefficient of contraction


It is the ratio between the area of the jet at the vena contracta to the area of the contracted flow section


Cc = Area at vena contracta/ Area of orifice


The typical value may be taken as 0.64 for a sharp orifice (concentric with the flow channel). The smaller the value, the more effect the vena contracta has.



See also






  • Borda-Carnot equation


References



  • Falkovich, G. (2011). Fluid Mechanics, a short course for physicists. Cambridge University Press. p. 11 and Exercise 1.3. ISBN 978-1-107-00575-4..mw-parser-output cite.citation{font-style:inherit}.mw-parser-output .citation q{quotes:"""""""'""'"}.mw-parser-output .citation .cs1-lock-free a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .citation .cs1-lock-limited a,.mw-parser-output .citation .cs1-lock-registration a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .citation .cs1-lock-subscription a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration{color:#555}.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration span{border-bottom:1px dotted;cursor:help}.mw-parser-output .cs1-ws-icon a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/4/4c/Wikisource-logo.svg/12px-Wikisource-logo.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output code.cs1-code{color:inherit;background:inherit;border:inherit;padding:inherit}.mw-parser-output .cs1-hidden-error{display:none;font-size:100%}.mw-parser-output .cs1-visible-error{font-size:100%}.mw-parser-output .cs1-maint{display:none;color:#33aa33;margin-left:0.3em}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-format{font-size:95%}.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-left{padding-left:0.2em}.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-right{padding-right:0.2em}



-

這個網誌中的熱門文章

Xamarin.form Move up view when keyboard appear

圖片
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box; } 0 I'm trying to build a Chat app UI, the idea of the Layout was pretty simple: When the input bar is focused, keyboard show up and "push" up the chat bar, as it's a grid, the ListView will resize to fit the screen: I update the input bar's margin to "push" it up: NSValue result = (NSValue)args.Notification.UserInfo.ObjectForKey(new NSString(UIKeyboard.FrameEndUserInfoKey)); CGSize keyboardSize = result.RectangleFValue.Size; if (Element != null){ Element.Margin = new Thickness(0, 0, 0,keyboardSize.Height); //push the entry up to keyboard height when keyboard is activated } And this is ...
閱讀完整內容

Post-Redirect-Get with Spring WebFlux and Thymeleaf

圖片
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box; } 2 Can someone explain to me how to implement the post-redirect-get pattern in Spring WebFlux and Thymeleaf? What subscribes on the database save method? @GetMapping("/register") public String showRegisterForm(Model model) { model.addAttribute("user", new User()); return "register"; } @PostMapping public String processRegisterForm(@Valid User user, BindingResult bindingResult) { if (bindingResult.hasErrors()) { return "register"; } else { userRepository.save(user); //what subscribes on this? //how to redirect on e.g. "/login"? ...
閱讀完整內容

Anylogic : not able to use stopDelay()

圖片
-2 I am building a railway station model. I want a train to depart when I click a button. I want to call stopDelay() for that but I am not sure how to do that and from which place. anylogic share | improve this question asked Nov 23 '18 at 10:12 Anupam Singh Anupam Singh 1 Hi Anupam, welcome to SOF. Please check how to ask good questions, see link below. Your question is...
閱讀完整內容