Wsrtjtyk

A portion of the vector field (sin y, sin x)

In vector calculus and physics, a vector field is an assignment of a vector to each point in a subset of space.^[1] A vector field in the plane (for instance), can be visualised as: a collection of arrows with a given magnitude and direction, each attached to a point in the plane. Vector fields are often used to model, for example, the speed and direction of a moving fluid throughout space, or the strength and direction of some force, such as the magnetic or gravitational force, as it changes from one point to another point.

The elements of differential and integral calculus extend naturally to vector fields. When a vector field represents force, the line integral of a vector field represents the work done by a force moving along a path, and under this interpretation conservation of energy is exhibited as a special case of the fundamental theorem of calculus. Vector fields can usefully be thought of as representing the velocity of a moving flow in space, and this physical intuition leads to notions such as the divergence (which represents the rate of change of volume of a flow) and curl (which represents the rotation of a flow).

In coordinates, a vector field on a domain in n-dimensional Euclidean space can be represented as a vector-valued function that associates an n-tuple of real numbers to each point of the domain. This representation of a vector field depends on the coordinate system, and there is a well-defined transformation law in passing from one coordinate system to the other. Vector fields are often discussed on open subsets of Euclidean space, but also make sense on other subsets such as surfaces, where they associate an arrow tangent to the surface at each point (a tangent vector).

More generally, vector fields are defined on differentiable manifolds, which are spaces that look like Euclidean space on small scales, but may have more complicated structure on larger scales. In this setting, a vector field gives a tangent vector at each point of the manifold (that is, a section of the tangent bundle to the manifold). Vector fields are one kind of tensor field.

Definition

Vector fields on subsets of Euclidean space

Two representations of the same vector field: v(x, y) = −r. The arrows depict the field at discrete points, however, the field exists everywhere.

Given a subset S in Rⁿ, a vector field is represented by a vector-valued function V: S → Rⁿ in standard Cartesian coordinates (x₁, ..., x_n). If each component of V is continuous, then V is a continuous vector field, and more generally V is a C^k vector field if each component of V is k times continuously differentiable.

A vector field can be visualized as assigning a vector to individual points within an n-dimensional space.^[1]

Given two C^k-vector fields V, W defined on S and a real valued C^k-function f defined on S, the two operations scalar multiplication and vector addition

(fV)(p):=f(p)V(p){displaystyle (fV)(p):=f(p)V(p),}

(V+W)(p):=V(p)+W(p){displaystyle (V+W)(p):=V(p)+W(p),}

define the module of C^k-vector fields over the ring of C^k-functions where the multiplication of the functions is defined pointwise (therefore, it is commutative with the multiplicative identity being f_id(p) := 1).

Coordinate transformation law

In physics, a vector is additionally distinguished by how its coordinates change when one measures the same vector with respect to a different background coordinate system. The transformation properties of vectors distinguish a vector as a geometrically distinct entity from a simple list of scalars, or from a covector.

Thus, suppose that (x₁,...,x_n) is a choice of Cartesian coordinates, in terms of which the components of the vector V are

Vx=(V1,x,…,Vn,x){displaystyle V_{x}=(V_{1,x},dots ,V_{n,x})}

and suppose that (y₁,...,y_n) are n functions of the x_i defining a different coordinate system. Then the components of the vector V in the new coordinates are required to satisfy the transformation law

Vi,y=∑j=1n∂yi∂xjVj,x.{displaystyle V_{i,y}=sum _{j=1}^{n}{frac {partial y_{i}}{partial x_{j}}}V_{j,x}.}

(1)

Such a transformation law is called contravariant. A similar transformation law characterizes vector fields in physics: specifically, a vector field is a specification of n functions in each coordinate system subject to the transformation law (1) relating the different coordinate systems.

Vector fields are thus contrasted with scalar fields, which associate a number or scalar to every point in space, and are also contrasted with simple lists of scalar fields, which do not transform under coordinate changes.

Vector fields on manifolds

A vector field on a sphere

Given a differentiable manifold M, a vector field on M is an assignment of a tangent vector to each point in M.^[2] More precisely, a vector field F is a mapping from M into the tangent bundle TM so that p∘F{displaystyle pcirc F} is the identity mapping
where p denotes the projection from TM to M. In other words, a vector field is a section of the tangent bundle.

An alternative definition: A smooth vector field X on a manifold M is a linear map X:C∞(M)→C∞(M){displaystyle X:C^{infty }(M)rightarrow C^{infty }(M)} such that X is a derivation:
X(fg)=fX(g)+X(f)g{displaystyle X(fg)=fX(g)+X(f)g} for all f,g∈C∞(M){displaystyle f,gin C^{infty }(M)} ^[3].

If the manifold M is smooth or analytic—that is, the change of coordinates is smooth (analytic)—then one can make sense of the notion of smooth (analytic) vector fields. The collection of all smooth vector fields on a smooth manifold M is often denoted by Γ(TM) or C^∞(M,TM) (especially when thinking of vector fields as sections); the collection of all smooth vector fields is also denoted by X(M){displaystyle scriptstyle {mathfrak {X}}(M)} (a fraktur "X").

Examples

The flow field around an airplane is a vector field in R³, here visualized by bubbles that follow the streamlines showing a wingtip vortex.

• A vector field for the movement of air on Earth will associate for every point on the surface of the Earth a vector with the wind speed and direction for that point. This can be drawn using arrows to represent the wind; the length (magnitude) of the arrow will be an indication of the wind speed. A "high" on the usual barometric pressure map would then act as a source (arrows pointing away), and a "low" would be a sink (arrows pointing towards), since air tends to move from high pressure areas to low pressure areas.


• 
  Velocity field of a moving fluid. In this case, a velocity vector is associated to each point in the fluid.


• 
  Streamlines, Streaklines and Pathlines are 3 types of lines that can be made from vector fields. They are :

streaklines — as revealed in wind tunnels using smoke.

streamlines (or fieldlines)— as a line depicting the instantaneous field at a given time.

pathlines — showing the path that a given particle (of zero mass) would follow.

• 
  Magnetic fields. The fieldlines can be revealed using small iron filings.


• 
  Maxwell's equations allow us to use a given set of initial conditions to deduce, for every point in Euclidean space, a magnitude and direction for the force experienced by a charged test particle at that point; the resulting vector field is the electromagnetic field.


• A gravitational field generated by any massive object is also a vector field. For example, the gravitational field vectors for a spherically symmetric body would all point towards the sphere's center with the magnitude of the vectors reducing as radial distance from the body increases.

Gradient field in euclidean spaces

A vector field that has circulation about a point cannot be written as the gradient of a function.

Vector fields can be constructed out of scalar fields using the gradient operator (denoted by the del: ∇).^[4]

A vector field V defined on an open set S is called a gradient field or a conservative field if there exists a real-valued function (a scalar field) f on S such that

V=∇f=(∂f∂x1,∂f∂x2,∂f∂x3,…,∂f∂xn).{displaystyle V=nabla f={bigg (}{frac {partial f}{partial x_{1}}},{frac {partial f}{partial x_{2}}},{frac {partial f}{partial x_{3}}},dots ,{frac {partial f}{partial x_{n}}}{bigg )}.}

The associated flow is called the gradient flow, and is used in the method of gradient descent.

The path integral along any closed curve γ (γ(0) = γ(1)) in a conservative field is zero:

∮γ⁡V(x)⋅dx=∮γ⁡∇f(x)⋅dx=f(γ(1))−f(γ(0)).{displaystyle oint _{gamma }V({boldsymbol {x}})cdot mathrm {d} {boldsymbol {x}}=oint _{gamma }nabla f({boldsymbol {x}})cdot mathrm {d} {boldsymbol {x}}=f(gamma (1))-f(gamma (0)).}

Central field in euclidean spaces

A C^∞-vector field over Rⁿ {0} is called a central field if

V(T(p))=T(V(p))(T∈O(n,R)){displaystyle V(T(p))=T(V(p))qquad (Tin mathrm {O} (n,mathbf {R} ))}

where O(n, R) is the orthogonal group. We say central fields are invariant under orthogonal transformations around 0.

The point 0 is called the center of the field.

Since orthogonal transformations are actually rotations and reflections, the invariance conditions mean that vectors of a central field are always directed towards, or away from, 0; this is an alternate (and simpler) definition. A central field is always a gradient field, since defining it on one semiaxis and integrating gives an antigradient.

Operations on vector fields

Line integral

A common technique in physics is to integrate a vector field along a curve, also called determining its line integral. Intuitively this is summing up all vector components in line with the tangents to the curve, expressed as their scalar products. For example, given a particle in a force field (e.g. gravitation), where each vector at some point in space represents the force acting there on the particle, the line integral along a certain path is the work done on the particle, when it travels along this path. Intuitively, it is the sum of the scalar products of the force vector and the small tangent vector in each point along the curve.

The line integral is constructed analogously to the Riemann integral and it exists if the curve is rectifiable (has finite length) and the vector field is continuous.

Given a vector field V and a curve γ, parametrized by t in [a, b] (where a and b are real numbers), the line integral is defined as

∫γV(x)⋅dx=∫abV(γ(t))⋅γ˙(t)dt.{displaystyle int _{gamma }V({boldsymbol {x}})cdot mathrm {d} {boldsymbol {x}}=int _{a}^{b}V(gamma (t))cdot {dot {gamma }}(t);mathrm {d} t.}

Divergence

The divergence of a vector field on Euclidean space is a function (or scalar field). In three-dimensions, the divergence is defined by

div⁡F=∇⋅F=∂F1∂x+∂F2∂y+∂F3∂z,{displaystyle operatorname {div} mathbf {F} =nabla cdot mathbf {F} ={frac {partial F_{1}}{partial x}}+{frac {partial F_{2}}{partial y}}+{frac {partial F_{3}}{partial z}},}

with the obvious generalization to arbitrary dimensions. The divergence at a point represents the degree to which a small volume around the point is a source or a sink for the vector flow, a result which is made precise by the divergence theorem.

The divergence can also be defined on a Riemannian manifold, that is, a manifold with a Riemannian metric that measures the length of vectors.

Curl in three-dimensions

The curl is an operation which takes a vector field and produces another vector field. The curl is defined only in three-dimensions, but some properties of the curl can be captured in higher dimensions with the exterior derivative. In three-dimensions, it is defined by

curlF=∇×F=(∂F3∂y−∂F2∂z)e1−(∂F3∂x−∂F1∂z)e2+(∂F2∂x−∂F1∂y)e3.{displaystyle operatorname {curl} ,mathbf {F} =nabla times mathbf {F} =left({frac {partial F_{3}}{partial y}}-{frac {partial F_{2}}{partial z}}right)mathbf {e} _{1}-left({frac {partial F_{3}}{partial x}}-{frac {partial F_{1}}{partial z}}right)mathbf {e} _{2}+left({frac {partial F_{2}}{partial x}}-{frac {partial F_{1}}{partial y}}right)mathbf {e} _{3}.}

The curl measures the density of the angular momentum of the vector flow at a point, that is, the amount to which the flow circulates around a fixed axis. This intuitive description is made precise by Stokes' theorem.

Index of a vector field

The index of a vector field is an integer that helps to describe the behaviour of a vector field around an isolated zero (i.e., an isolated singularity of the field). In the plane, the index takes the value -1 at a saddle singularity but +1 at a source or sink singularity.

Let the dimension of the manifold on which the vector field is defined be n. Take a small sphere S around the zero so that no other zeros lie in the interior of S. A map from this sphere to a unit sphere of dimensions n − 1 can be constructed by dividing each vector on this sphere by its length to form a unit length vector, which is a point on the unit sphere S^n-1. This defines a continuous map from S to S^n-1. The index of the vector field at the point is the degree of this map. It can be shown that this integer does not depend on the choice of S, and therefore depends only on the vector field itself.

The index of the vector field as a whole is defined when it has just a finite number of zeroes. In this case, all zeroes are isolated, and the index of the vector field is defined to be the sum of the indices at all zeroes.

The index is not defined at any non-singular point (i.e., a point where the vector is non-zero). it is equal to +1 around a source, and more generally equal to (−1)^k around a saddle that has k contracting dimensions and n-k expanding dimensions. For an ordinary (2-dimensional) sphere in three-dimensional space, it can be shown that the index of any vector field on the sphere must be 2. This shows that every such vector field must have a zero. This implies the hairy ball theorem, which states that if a vector in R³ is assigned to each point of the unit sphere S² in a continuous manner, then it is impossible to "comb the hairs flat", i.e., to choose the vectors in a continuous way such that they are all non-zero and tangent to S².

For a vector field on a compact manifold with a finite number of zeroes, the Poincaré-Hopf theorem states that the index of the vector field is equal to the Euler characteristic of the manifold.

Physical intuition

Magnetic field lines of an iron bar (magnetic dipole)

Michael Faraday, in his concept of lines of force, emphasized that the field itself should be an object of study, which it has become throughout physics in the form of field theory.

In addition to the magnetic field, other phenomena that were modeled by Faraday include the electrical field and light field.

Flow curves

Consider the flow of a fluid through a region of space. At any given time, any point of the fluid has a particular velocity associated with it; thus there is a vector field associated to any flow. The converse is also true: it is possible to associate a flow to a vector field having that vector field as its velocity.

Given a vector field V defined on S, one defines curves γ(t) on S such that for each t in an interval I

γ′(t)=V(γ(t)).{displaystyle gamma '(t)=V(gamma (t)),.}

By the Picard–Lindelöf theorem, if V is Lipschitz continuous there is a unique C¹-curve γ_x for each point x in S so that, for some ε > 0,

γx(0)=x{displaystyle gamma _{x}(0)=x,}

γx′(t)=V(γx(t))∀t∈(−ε,+ε)⊂R.{displaystyle gamma '_{x}(t)=V(gamma _{x}(t))qquad forall tin (-varepsilon ,+varepsilon )subset mathbf {R} .}

The curves γ_x are called integral curves or trajectories (or less commonly, flow lines) of the vector field V and partition S into equivalence classes. It is not always possible to extend the interval (−ε, +ε) to the whole real number line. The flow may for example reach the edge of S in a finite time.
In two or three dimensions one can visualize the vector field as giving rise to a flow on S. If we drop a particle into this flow at a point p it will move along the curve γ_p in the flow depending on the initial point p. If p is a stationary point of V (i.e., the vector field is equal to the zero vector at the point p), then the particle will remain at p.

Typical applications are streamline in fluid, geodesic flow, and one-parameter subgroups and the exponential map in Lie groups.

Complete vector fields

By definition, a vector field is called complete if every one of its flow curves exist for all time.^[5] In particular, compactly supported vector fields on a manifold are complete. If X{displaystyle X} is a complete vector field on M{displaystyle M}, then the one-parameter group of diffeomorphisms generated by the flow along X{displaystyle X} exists for all time. On a compact manifold without boundary, every smooth vector field is complete. An example of an incomplete vector field V{displaystyle V} on the real line R{displaystyle mathbb {R} } is given by V(x)=x2{displaystyle V(x)=x^{2}}. For, the differential equation dxdt=x2{displaystyle {frac {dx}{dt}}=x^{2}}, with initial condition x(0)=x0{displaystyle x(0)=x_{0}}, has as its unique solution x(t)=x01−tx0{displaystyle x(t)={frac {x_{0}}{1-tx_{0}}}} if x0≠0{displaystyle x_{0}neq 0} (and x(t)=0{displaystyle x(t)=0} for all t∈R{displaystyle tin mathbb {R} } if x0=0{displaystyle x_{0}=0}). Hence for x0≠0{displaystyle x_{0}neq 0}, x(t){displaystyle x(t)} is undefined at t=1x0{displaystyle t={frac {1}{x_{0}}}} so cannot be defined for all values of t{displaystyle t}.

f-relatedness

Given a smooth function between manifolds, f: M → N, the derivative is an induced map on tangent bundles, f_*: TM → TN. Given vector fields V: M → TM and W: N → TN, we say that W is f-related to V if the equation W ∘ f^* = f_* ∘ V holds.

If V_i is f-related to W_i, i = 1, 2, then the Lie bracket [V₁, V₂] is f-related to [W₁, W₂].

Generalizations

Replacing vectors by p-vectors (pth exterior power of vectors) yields p-vector fields; taking the dual space and exterior powers yields differential k-forms, and combining these yields general tensor fields.

Algebraically, vector fields can be characterized as derivations of the algebra of smooth functions on the manifold, which leads to defining a vector field on a commutative algebra as a derivation on the algebra, which is developed in the theory of differential calculus over commutative algebras.

See also

References

Bibliography

• 
  Hubbard, J. H.; Hubbard, B. B. (1999). Vector calculus, linear algebra, and differential forms. A unified approach. Upper Saddle River, NJ: Prentice Hall. ISBN 0-13-657446-7.
  


• 
  Warner, Frank (1983) [1971]. Foundations of differentiable manifolds and Lie groups. New York-Berlin: Springer-Verlag. ISBN 0-387-90894-3.
  


• 
  Boothby, William (1986). An introduction to differentiable manifolds and Riemannian geometry. Pure and Applied Mathematics, volume 120 (second ed.). Orlando, FL: Academic Press. ISBN 0-12-116053-X.
  

External links

Wikimedia Commons has media related to Vector fields.

• Online Vector Field Editor


• 
  Hazewinkel, Michiel, ed. (2001) [1994], "Vector field", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4
  


• 
  Vector field — Mathworld
  


• 
  Vector field — PlanetMath
  


• 3D Magnetic field viewer


• Vector fields and field lines


• 
  Vector field simulation An interactive application to show the effects of vector fields