Wsrtjtyk

The problem could also be a in a different namespace in svc file as it is in svc.cs file.

In svc file namespace must be in the following format.

Service="Namespace.SvcClassName"

I know this is probably the "obvious" answer, but it tripped me up for a bit. Make sure there's a dll for the project in the bin folder. When the service was published, the guy who published it deleted the dlls because he thought they were in the GAC. The one specifically for the project (QS.DialogManager.Communication.IISHost.RecipientService.dll, in this case) wasn't there.

Same error for a VERY different reason.

This error occurs due to mismatch of Service name in .SVC file. Probably you might have changed the name of the service class that is implementing the interface.The Solution is to open .SVC file and exactly match the Service attribute and CodeBehind Attribute. So your .SVC file should be like

<%@ ServiceHost Language="Language you are using" Debug="bool value to enable debugging" Service="Service class name that is implementing your Service interface" Codebehind="~/Appcode/Class implementing interface.cs"%>. for eg.



<%@ ServiceHost Language="C#" Debug="true" Service="Product.Service" CodeBehind=~/AppCode/Product.Service.cs"%>

This example is for .svc file that is using C# language, with debugging enabled, Service class implementing interface and this class is within app folder with name Service.cs and Product is namespace for Service class.

Also Please make respective change in service config file.

 <system.serviceModel>

    <services>

    <service name="Product.Service" behaviorConfiguration="ServiceBehavior">

    <endpoint address="" binding="wsHttpBinding" contract="Product.Iservice">

    </endpoint>

    <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>

    </service>

    </services>

    <behaviors>

    <behavior name="ServiceBehavior">

    <serviceMetaData httpGetEnabled="true"/>

    <serviceDebug includeExceptionDetailInFaults="false"/>

    </behavior>

    </behaviors>

    </system.serviceModel>

Double check that you're referencing the correct type from the ServiceHost directive in the .svc file. Here's how...

1. In the VS project containing your web service, open the .svc file in the XML editor (right-click the file, Open With..., choose XML (Text) Editor, OK).


2. Note the "Service" attribute value.


3. Make sure it matches the fully qualified type name of your service. This includes the namespace + type name. For example, if the namespace is "MyCompany.Department.Services" and the class is called "MyService", then the Service attribute value should be "MyCompany.Department.Services.MyService".

I had the same Exception, this is due to the Type not correctly mentioned in the .svc file

I corrected with below fix.

if your .svc.cs has class like this

namespace Azh.Services.MyApp

{

    public class WcfApp : FI.IWcfAppService

{

...

}

}

for this the .svc file should look like this

<%@ ServiceHost Language="C#" Debug="true" Service="Azh.Services.MyApp.WcfApp" CodeBehind="WcfApp.svc.cs" %>

You should configure your bin folder path to service local bin.

I practically solved the same issue . Here is my suggestion -- The error means that the object referenced in the Service attribute is not found. For the object to be found, the application or library must build output to the bin folder.

You can edit property page of the application and specify the output path to 'bin'.

If you have renamed anything verify the (Properties/) AssemblyInfo.cs is correct, as well as the header in the service file.

ServiceName.svc

<%@ ServiceHost Language="C#" Debug="true" Service="Company.Namespace.WcfApp" CodeBehind="WcfApp.svc.cs" %>

Aligning with your namespace in your Service.svc.cs

Two keys to this for certain flavors of the ' Service attribute value in the ServiceHost directive could not be found'-problem: (1) If you're working in Silverlight, you should use the Silverlight WCF-Enabled Service, not the non-Silverlight WCF Service; this will update Web.Config for the bindings and allow the type to be visible; (2) Match the class name in the new service to the Service name -- the goal here is to make a wsdl... so that you know the service's functionality is exposed to your Silverlight client and to the Web; it helps to have the service match the class. If you get the names gummed up, you will have to edit the Web.Config in 3 places (serviceBehaviors, services and bindings).

There were so many sincere attempts to help folks with this problem that were not helpful to me that it should be stressed that this write-up is for a Silverlight solution and it may not apply for someone not using Silverlight 3 in a client/Web configuration.

Hope it helps.

I had the same problem but no clue what caused it. I Solved it by changing from Debug to Release and Run using Debug/Start New Instance. After that, it ran in both Release and Debug. It was magic...

I also ran into this issue trying the Microsoft.ServiceModel.Samples.Calculator WCF sample. I am using IIS 5.1. I resolved it by ensuring that the website that was auto-generated (servicemodelsamples) was not an application. Right-click the folder, click "Properties" and click the "Create" button.

I had this problem - my service type was in the GAC. It WOULD work if i added the dll containing the type to the bin folder but as it was in the GAC this was NOT what I wanted. I eventually added this to the web.config for the service

<system.web>

    <customErrors mode="RemoteOnly" />

    <compilation debug="true" targetFramework="4.0">

        <assemblies>

            <add assembly="[name in GAC], Version=[version in GAC], Culture=neutral, PublicKeyToken=[ac token]" />

        </assemblies>

    </compilation>

</system.web>

and it worked without needing any dlls in the bin folder.

I had my service dll's in the bin folder where the svc file was residing. Moving the dll's to the root bin folder solved the problem.

In my case Right Click on Virtual Directory and Select "Convert To Application" worked!

I faced with this error today, reason was; IIS user doesn't have permission to reach to the application folder. I gave the read permissions to the app root folder.

This may sound trivial, but worth mentioning:
You have to build the service (in Visual Studio) - then a DLL will be created in the
bin subfolder.

When the service is "deployed" on a server - that bin folder needs to have that DLL file in it - otherwise this error will be thrown...

Add reference of service in your service or copy dll.

Building the solution before adding the service reference solved my problem.

I got this error when trying to add the Service reference for the first Silverlight enabled WCF in the same solution. I just build the .Web project and it started working..

I had the same problem, found this thread, tried all but nogo.

Then I spend another 4 hours wasted time.

Then I found that the compilation settings had changed from 64bits to x86. When I changed it back to 64bits it worked. Don't know exactly why but could be that the IIS application pool was not set to allow 32 bit applications.

1. Make sure markup (svc) file has service attribute with namespace.classname and codebehind will be classname.svc.cs




2. Rebuild the solution




3. Restart the app pools from local IIS once.